SPECS:
Accuracy plus or minus 1/16”
• Range 30 FT above or below reel
• Operating temp. 100 F to 10 F (these ranges
• Tubing length 100 Ft, This gives a 200 Ft operating area. Easily “leapfrog” for larger areas.
can be exceeded however continual use out of this range may eventually damage instrument over time)
• BT Compatibility iPhone 7 or later updated to iOS 11 or later, iPad, 5th, 6th and 7th generation iPad with an A9 or bigger processor
No Clear Line of Sight Needed- Works around, behind, over obstructions. Anywhere you can take the tubing you have a valid reading.
• Stores data including 3D Maps and job surveys directly to your Smart Device Wirelessly
• Sends data/job surveys, 3D Maps to your Office, Team, Client directly from the field
• Plots true 3D Terrain Maps for upload directly into CAD. True X,Y, & Z measurements
• Record Comments directly with data for job clarity
• Adds photos directly into 3D data for job clarity • Built in Compass for easily aligning 3D Maps
and surveys
• Backlight for night use
• Engineering Function calculates feet above sea level
• Automatically calculates % of Slope between all consecutive points, or 2 selected points
• No Factory Calibration nor Recharge ever needed- Most Field Repairs can be done by owner on the job site
• Range function for ease of finishing grades
• Saves data in Zip file for organization and ease
of communication
• Data may be “Spoken” from device by enabling audio voice mode, Frees your sight for other tasks
• True On Board Computer allows functions to be expanded via upgrades
NOTES:
The app upgrades the same as any other app. You should receive a notice to update when they are available if you have notifications turned on.
Firmware upgrades to the level come through your phone into the level via Bluetooth and take appx 6 minutes. Your smart device/phone will need to be dedicated to this task for 6 minutes. Incoming calls, etc will stop and reset the upload.
POWER SUPPLY, 2 AA Batteries, Duracell Coppertop is the recommended battery. Working life 133 hours with or without BT or 16 eight hour shifts in continual use. Using the backlight cuts working time 50% and range mode pulls a bit more power. Sleep mode/turned off- 130 months or a bit over a decade.
WHAT THIS MEANS FOR MOST CONTRACTORS IS 4 TO 6 MONTHS WORKING LIFE UNDER NORMAL CONDITIONS.

